Part of the wicket
The stumps are three vertical posts which support two bails. The stumps and bails are usually made of wood, and together form a wicket at each end of the pitch. The overall width of each wicket is 9 inches (22.9 cm).Each stump is 28 inches (71.1 cm) tall with maximum and minimum diameters of 1½ inches (3.81 cm) and 1⅜ inches (3.49 cm). They have a spike at one end for inserting into the ground, and the other end has a U-shaped 'through groove' to provide a resting place for the bails.
Each stump is referred to by a specific name:
- Off stump is the stump on the off side of the wicket (the same side as the batsman's bat).
- Middle (Lie) stump is the center stump, on the lie of the wicket.
- Leg stump is the stump on the on side of the wicket (the same side as the batsman's legs).
In modern professional play, the stumps are often emblazoned with a sponsor's logo. Although they are too far away from spectators to be seen, such logos are visible on television coverage.
For professional matches, often one or more of the stumps is hollow and contains a small television camera. This is aligned vertically, but can view through a small window on the side of the stump via a mirror. The so-called stump-cam gives a unique view of play for action replays, particularly when a batsman is bowled.
Manner of dismissing a batsman
- the wicket-keeper puts down the wicket, while the batsman is:
- out of his ground (because he has moved down the pitch beyond the popping crease, usually in an attempt to hit the ball); and
- not attempting a run.
Stumping is the fifth most common form of dismissal after caught, bowled, leg before wicket and run out, though it is seen more commonly in Twenty20 cricket because of its more-aggressive batting. It is governed by Law 39 of the Laws of cricket. It is usually seen when a medium or slow bowler is bowling, as with fast bowlers a wicket-keeper takes the ball too far back from the wicket to attempt a stumping. It requires co-operation between a bowler and wicket-keeper: the bowler must induce the batsman to move out of his ground, and the wicket-keeper must catch and break the wicket before the batsman realities he has missed the ball and makes his ground, i.e. places the bat or part of his body on the ground back behind the popping crease. If the bails are removed before the wicket-keeper has the ball, the batsman can still be stumped if the wicket-keeper removes one of the stumps from the ground, while holding the ball in his hand. The bowler is credited for the batsman's wicket, and the wicket-keeper is credited for the dismissal. A batsman may be out stumped off a wide delivery.
Notes:
- "On the crease" is "behind the crease".
- The wicket must be properly put down in accordance with Law 28 of the Laws of cricket: using either the ball itself or a hand or arm that is in possession of the ball. Note that since the ball itself can legally put down the wicket, a stumping is still valid even if the ball merely rebounds from the 'keeper and breaks the wicket, even though never controlled by him.
- The wicket-keeper must allow the ball to pass the stumps before taking it, unless it has touched either bat or batsman first.
Thank you very much for your comments